Up
|
We are a Factory Athorized Dealer. Please feel free to call them and verify 1-800-935-3644 The Model 10000ADP-CS is cabled for battery operation and with the addition of the AC to DC Power Converter (included) the Model 10000ADP-CS will also connect to CC (constant current) DC stick machines as well as CV (constant voltage) mig machines. This unit will function as a stand alone welder when connected to batteries or as a spool gun when connected to your DC welder! The Model #10000ADP-CS has a two year 100% parts and labor limited factory warranty. Model 10000 ADP-CS Features: This unit features the Cold Trigger Switch. With this feature, the Ready Welder, even when connected to a power source, will not light up an arc when the trigger is released. Without this, if the electrode wire is accidentally left protruding from a gun while still connected to a power source, and comes in contact with a metal which happens to be grounded, an arc would be struck, with possible dangerous results. Welds Steel, Stainless and Aluminum or Any Metals Where Standard One or Two Pound Spools are Available Connects to Batteries – 18 Volt Batteries can do Thin Sheet Metal – 24 Volt will Single Pass 1/2" @275 amp – 36 Volt will Weld up to 3/4" @350 to 400 amp Welds 22 Gage to 3/4" - Connects to MIG/Constant Voltage Output Welders - Uses Wire Sizes from .023 to .045 without Changing Rollers - Uses Heavy-Duty TWECO Quality Front End Consumables - Wire Speeds of 50 Inches to 900 Inches per Minute - Built-in Stitch Mode for Thinner Material - Polarity Indicator Lights - Ten Foot Cable with Quick Disconnects, Can be Extended to 100 Feet - Built-in Gas Valve - Ground Cable Attached Ready Welder II Case Includes: RWII High-Impact MIG Gun, Ten Feet of Cable, One Spool of Flux Core Wire, 300 Amp Ground Clamp, Two Battery Clamps, Extra Tips and Gas Hose Fitting, Ten Extra Feet of Gas Hose Foam Lined Blow-Molded Tough Briefcase. AC to DC Power Converter Supply to Drive Gun Controls When Connected to a CC Power Source (stick machine). These units are brand new in the box and are the most recent technology available from Ready Welder Corp. (they have the most recent upgrades) as can be seen on their web site. www.readywelder.com. Ready Welders come with a two year Limited Guarantee on All Parts and Labor. Toll free technical assistance is available. Do business with an authorized dealer! Vulcan Performance Inc. is an authorized distributor/reseller for the Ready Welder Corporation. Please feel free to check the web link below for verification or call Ready Welder directly at 1-800-935-3644.Vulcan Performance Inc. is a Washington corporation. http://www.readywelder.com/dom_wash.htm All others should contact us for rates, please include country, city and postal code. Please feel free to ask any questions you may have. All sales are final. All warranty issues shall be addressed with the factory. We do not do 30 trials. |