Up
|
SquareTrade © AP6.0LANDIS MODEL 3RH UNIVERSAL 14" X 36" CC I.D./O.D. Maximum Swing Over Table: 14 31/32" Minimum Diameter Wheel To Grind To Zero Diameter Work On Centers: 9" Traverse Speed: 2 To 240 I.P.M. Traverse Per Turn Of Handwheel: Slow: 100", Fast: 1.000" Wheel Size: 14" Diameter x 2" Wide x 5" Bore Lower: 60 Degrees Clockwise, 30 Degrees Counterclockwise (2) Grinding Wheel Speeds: 1725 & 2185 RPM Distance Wheel Centerline To Work Centerline: 1 1/2" Minimum, 15 1/2" Maximum Automatic Infeed @ Table Reversal On Diameter: 0.0002" To .004 Motorized Workhead & Tailstock: Infinitely Variable Workhead: 30-150 RPM & 120-600 RPM Two Speed Indicator Shows Low 0-80, High 0- 360 Spindle Hole Size: 1" - 1 1/4" Workhead Swivel Range: 120 Degrees Swivel Table Graduated: 3 1/2" Per Foot Swivel Table Graduated: 16 Degrees Swing Down Internal Grinding Attachment With Spindle Headstock Swivels, Workhead Appears To Rotate 30 Degrees Out & 90 Degrees In (2) 2 Point Steady Rests, (See Photo) (1) 3 Point Steady Rests, (See Photo) 12" Diameter 4 Jaw Independent Chuck Hydraulic Operation Featuring Power Table Traverse Auto Infeed Of Wheelhead At Table Reversals, (Left Hand & Right Hand) Variable Electronic Speed Control For Workhead Bijur One-Shot Lubrication System For Wheelhead Miscellaneous Tooling For Grinder & Misc. Parts Included, (See Photo) 3 HP, 230 Volts, 60 Cycle, 3 Phase Workhead Drive Motor 1/3 HP, 230/460 Volts, 60 Cycle, 3 Phase Coolant Pump Motor With Internal Reservoir 2 HP, 230/460 Volts, 3 Phase, 60 Cycle Internal 2 HP, 230/460 Volts, 3 Phase, 60 Cycle HydraulicPump Motor 7 1/2 HP, 230/460 Volts, 3 Phase, 60 Cycle The 18" Wheel On The Machine Is Slightly Worn, But We Have New 18" Wheels In Boxes, (See Photo) Came From An Engineering School Which Used This Machine For Instruction & Testing, Ran Parts For Teaching, Not Production Excellent Condition & Appearance Inspect Under Power At Our Facility With Advance Notice Copy Of Operator's Handbook With Parts List Included Approximate Dimensions Of Machine: 79" D x 10' W x 74" H Approximate Weight Of Machine: 10,600 Lbs. Approximate Dimensions Of Panel: 20" D x 64" W x 88" H Approximate Weight Of Panel: 1,240 Lbs. Approximate Dimensions Of Crate: 46" L x 32" W x 30" H Approximate Weight Of Crate: 450 Lbs. Approximate Dimensions Of Skid: 31" L x 35" W x 39" H Approximate Weight Of Crate: 300 Lbs. Approximate Total Weight: 12,590 Lbs. This Machine Was Used As A Demo "Test" For An Engineering School-Not Run On Production. Very Low Hours On This Machine. ONE OF A KIND! RARE ITEM! Nothing Like This On The Market Today (Age And Condition). New Cost Approximately $280,000.00 USD Today. |